Control Panel

All vital base controls, at your fingertips.

If your contraption requires more than a couple of buttons or levers to operate, the controls can take up a lot of room and leave you puffed out running back and forth between them. A Control Panel lets you fit up to 16 levers, buttons and indicator lamps into one block space for the ultimate in compactness and ease of use.

Crafting

A control panel is made by using a saw diagonally on a Hollow Cover. The same method is used to create Miniature Levers, Miniature Buttons and Miniature Lamps from their full-size counterparts to put on your control panel, and Miniature Covers to cover up unused places.

Note that the lamp must be a Project Red "Fixture" type. The miniature lamps will have the same colour as the fixture they were made from.

Tool	Ingredients	Recipe	Product
Saw	Hollow Cover		Control Panel
	Lever		Miniature Lever
	Button		Miniature Button
	Fixture		Miniature Lamp
	Cover		Miniature Cover

Placement and Usage

A control panel is placed into the world the same way as a cover. It has a front and a back; the front is marked with dotted squares indicating where controls can be placed, and the back is marked with dotted circles.

There are two ways that a control panel can be positioned, depending on whether you intend to embed it in a wall or attach it to the surface of another block. Either way, you need to make sure the front side is facing the way you want. If it's not, you can flip the control panel around by shift-right-clicking on it with a screwdriver.

Flush Mount	Surface Mount

The control panel is embedded in the wall, and bundled cable connects from the back.	The control panel is attached to the surface of another block, and bundled cable connects from the side.

Once the control panel is placed, you need to populate it with miniature levers, buttons and lamps. To place a control, right-click with it on one of the dotted squares. To remove a control, right-click on it with a screwdriver.

You can hide the dotted square for an unused space by placing a Miniature Cover on it. The cover needs to be made of the same material as the control panel.

Connections

Each space on the panel corresponds to a colour of
wire in the bundled cable as shown in this chart.

Labels

You can put a text label above and below each control. To edit the labels for a space, right-click on it with a piece of charcoal.

Painting Controls

Miniature levers and buttons can be painted different colours. To paint a control, you first need to craft an empty spray can and fill it with paint. Then place the spray can to the right of the item to be painted in a crafting grid. Each spray can may be used 256 times.

Note that you can't change the colour of a miniature lamp by painting it; you need to make it from the appropriate colour of Fixture.

Tool			Spray Can	Spray Can
Ingredients	1 Button (full-size) 2 Iron Ingots	1 Empty Spray Can 1 Milk 1 Egg 1 Dye	Miniature Lever	Miniature Button
Recipe
Product	Empty Spray Can	Spray Paint	Coloured Miniature Lever	Coloured Miniature Button